*** NOW OFFICIALLY LICENSED BY GM RESTORATION PARTS ***
Fesler billet Trunk hinges for the 1966-67 Chevy Nova cars.
The Tension Rods are removed and replace with gas struts to hold the trunk up so it will stop falling on you.
Comes with all hardware and take about an hour to install. You can also install them on a finished car.
We also offer a full range of billet hood hinges made from the finest quality aluminum 6061 T6 and use weatherproof bearings and stainless steel hardware to ensure proper operation in any climate, engineered for smooth, effortless operation. Each hinge is machined to perfection in a manner which is not only fully functional but visually appealing as well.
Please allow additional time for polishing and anodizing
One Year Limited
Important Technical Information:
Fesler Billet makes every effort to ensure that you are provided with the most accurate and up-to-date technical information. However, all technical information is approximate and may vary upon application. Fesler Billet is not responsible for any consequences resulting from manufacture’s technical mid-year changes. Fesler Billet products should only be installed by a qualified, licensed auto mechanic experienced in the installation of such products.
Important Anodizing Information:
Anodizing does not produce "flawless" color or finish on any Fesler part order that way. In fact, you should expect to encounter minor variations (or what some call "blemishes") in the color and finish in individual pieces. Every Fesler finish is unique in this regard. Remember, these variations are normal, and do not affect the performance of the part in any way.
Other Important Stuff You Should Probably Read:
Fesler Billet is not responsible for customer applications that are outside the normal and intended use of our products, including specific model and year applications.
Fesler Billet designs all parts off original OEM applications. Due to the vast array of manufacturers for aftermarket parts, it is possible that you may have to make some minor adjustments to either our part or your sheet metal in order for the part to fit properly.
Posted by Brannons Auto Works, Moline, Ill on 21st May 2011
The hinges add a finished touch to an upholstered trunk! Installation went good, had a few questions during the process, and Amy & Rob handled very well. Would suggest wrapping with green tape, so they don't get marred or scratched.
Really set the trunk area off, was worth the addition. Something that is really noticed.