The TH-2CAM trunk hinge was designed to fit the 1970-1981 Chevrolet Camaros. TH-2CAM hinge is one of our most versatile, reliable trunk hinges. As with all our products, the TH-2CAM was designed in our Scottsdale facility and then manufactured using only the best grades of aluminum, bearings and hardware. Each product is hand assembled in-house after rigorous quality control checks.
Pride and quality are important to Fesler and as a result we use 6061 aerospace grade billet aluminum for phenomenal strength and durability. Weather tight, dust resistant bearings and stainless steel button head hardware are used to guarantee accurate functionality in any climate. We also include proprietary reinforcement and safety elements to insure lifetime strength and durability
The TH-2CAM hinge offers an affordable functioning option for the nation’s most popular muscle car. The tension rods are removed and replaced with gas struts to hold the trunk up so it will stop falling on you. Our hinges offer more stability and support and are incredibly stronger than stock hinges.
44-year old, rusty steel hinge frames can now be replaced with distinctive aluminum assemblies and bulky outdated springs can be replaced with mechanically advanced gas charged carbon steel lift supports. The high grade gas lift supports provide maximum lift assist as well as corrosion resistance and are covered by a 2 year marine environment warranty. Each pair of lift supports are engineered to last up to 50,000 cycles. Each pair of hinges come standard with our black carbon lift supports but, polished stainless steel lift supports can be added for only $95.00 more.
We offer strut options for steel, fiberglass or carbon fiber lids. Be sure to choose your correct option when ordering. Please understand that, rarely, some lids can be too heavy for our strongest lift support. Because we have researched and engineered our lift supports to contain the maximum amount of gas to operate at a safe level, we are unwilling to risk vehicle damage and/or human injury by simply making our struts stronger. Fesler takes safety very seriously and would never put your project or well-being in jeopardy just to sell you a product. While we are the only hinge manufacturer that offers 8 separate lift support pressures, it is entirely possible that we may not have a pressure that will SAFELY hold up your hood.
The stylish TH-2CAM hinges are available in a few different finishes including natural, polished, brushed and black anodized.
Kit includes one bracket and one gas lift support.
** Please be sure to read our Hinge Installation article for a better idea of how to properly align your hood hinges. Fesler hinges were made to fit EXACTLY like OE and do not require any modifications to install. If you feel your mounting locations are not tall enough or that new mounting holes are necessary there is most likely a problem with your aligning method. Please use our article as a troubleshooting guide before modifying the hinges.
General Motors Trademarks used under license to Fesler Productions, LLC.
©2016 Fesler Productions, LLC
ALL RIGHTS RESERVED. This part description contains material protected under International and Federal Copyright Laws and Treaties. Any unauthorized reprint or use of this material is prohibited. No part of this description may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from Fesler Productions, LLC.
Customers also viewed