Questions? Feedback? powered by Olark live chat software
1957 Chevy Hood Hinge (Pair)

1957 Chevy Hood Hinge (Pair)

Write a Review
Fesler tries to stock natural, polished & black finishes, however backorders can occur. If your order is critical, call to check stock before ordering.
15.00 LBS
Calculated at Checkout

The H-1410 hinge was designed to fit the  1957 Chevrolet Bel Air, Sedan Delivery, 210, 150 and Nomad models. This hinge is one of our most versatile and reliable hood hinges. As with all our products, the H-1410 was designed in our Scottsdale facility and then manufactured there using only the best grades of aluminum, bearings and hardware. Each set is hand assembled in house after rigorous quality control checks.

Pride and quality are important to Fesler and as a result we use 6061 aerospace grade billet aluminum for phenomenal strength and durability. Weather tight, dust resistant bearings and stainless steel button head hardware are used to guarantee accurate functionality in any climate.  We also include proprietary reinforcement and safety elements to insure lifetime strength and durability

Fesler hinges offer an affordable functioning option for the nation’s most popular muscle cars and hot rods. Until now, the only options for “custom” hood hinges were chromed versions of the factory originals that, while offering glitter and shine, compromised strength by actually weakening the spring. Our hinges offer more stability and support and are incredibly stronger than stock and/or chromed stock hinges.

59-year old, rusty steel hinge frames can now be replaced with distinctive aluminum assemblies and bulky outdated springs can be replaced with mechanically advanced gas charged carbon steel lift supports.  The high grade gas lift supports provide maximum lift assist as well as corrosion resistance and are covered by a 2 year marine environment warranty. Each pair of lift supports are engineered to last up to 50,000 cycles. Each pair of hinges come standard with our black carbon lift supports but, polished stainless steel lift supports can be added for only $95.00 more.

Please be aware that heavier (those with skinned hood, extra weight from body work, additional metal work like added hood scoops) may require a heavier lift support option to keep the hood from sagging during display.  Be sure to choose your correct hood weight when ordering. Please understand that some hoods could be too heavy for our strongest lift support. Because we have researched and engineered our lift supports to contain the maximum amount of gas to operate at a safe level, we are unwilling to risk vehicle damage and/or human injury by simply making our struts stronger.  Fesler takes safety very seriously and would never put your project or well-being in jeopardy just to sell you a product. While we are the only hood hinge manufacturer that offers 8 separate lift support pressures, it is entirely possible that we may not have a pressure that will SAFELY hold up your hood.

The stylish H-1410 hinges are available in a few different finishes including natural, polished, brushed and black anodized.

* Models that still use the stock battery tray will need minor modification to the tray itself. Most modifications require only the slight bending of the battery tray or the addition of a custom stand off to make room for the hinge’s lift support. No cutting is involved.

* Please be sure to read our Hinge Installation article for a better idea of how to properly align your hood hinges. Fesler hinges were made to fit EXACTLY like OE and do not require any modifications to install. If you feel your mounting locations are not tall enough or that new mounting holes are necessary there is most likely a problem with your aligning method. Please use our article as a troubleshooting guide before modifying the hinges.

 For 1955-1956 Belair and like models please see part number H-508.

FREE SHIPPING applies to continetial USA only. 

©2016 Fesler Productions, LLC

ALL RIGHTS RESERVED. This part description contains material protected under International and Federal Copyright Laws and Treaties. Any unauthorized reprint or use of this material is prohibited. No part of this description may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording, or by any information storage and retrieval system without express written permission from Fesler Productions, LLC. 



1 Review Hide Reviews Show Reviews

  • 5
    They are the best

    Posted by Jerome B. on 16th Jan 2011

    I own a number of pro touring cars, Camero and 1956-57 Chevrolet's. I have purchased, installed and used a large number of Fesler Billet products and I can state infadicaly they are the best in all areas quality and fit. Their sales staff are very helpful and knowledgeable and they deliver exactly when they promise. I totally enjoy my relationship with Fesler Billet.

one year limited Important Technical Information: Fesler Billet makes every effort to ensure that you are provided with the most accurate and up-to-date technical information. However, all technical information is approximate and may vary upon application. Fesler Billet is not responsible for any consequences resulting from manufacture’s technical mid-year changes. Fesler Billet products should only be installed by a qualified, licensed auto mechanic experienced in the installation of such products. Important Anodizing Information: Anodizing does not produce "flawless" color or finish on any Fesler part order that way. In fact, you should expect to encounter minor variations (or what some call "blemishes") in the color and finish in individual pieces. Every Fesler finish is unique in this regard. Remember, these variations are normal, and do not affect the performance of the part in any way. Other Important Stuff You Should Probably Read: Fesler Billet is not responsible for customer applications that are outside the normal and intended use of our products, including specific model and year applications. Fesler Billet designs all parts off original OEM applications. Due to the vast array of manufacturers for aftermarket parts, it is possible that you may have to make some minor adjustments to either our part or your sheet metal in order for the part to fit properly.