1955-59 C-10 Dash Overlay
1955-59 C-10 Dash Overlay
1955-59 C-10 Dash Overlay
1955-59 C-10 Dash Overlay
1955-59 C-10 Dash Overlay
Fesler USA

1955-59 C-10 Dash Overlay

Sale price$399.00

Fesler Dash Overlay | 1955–1959 Chevy C10

Hand made in Arizona from hand-laid fiberglass, this Fesler dash overlay is built in house, inspected, finished, packaged, and shipped by our team. The panel drops over the factory dash and bolts on in about 30 minutes, then finishes cleanly with your choice of upholstery or paint. It is also designed to work with A-pillar pads, whether you run them raw or wrapped.

Key features

  • Hand-laid fiberglass for strength and a smooth, finish-ready surface.
  • Direct drop-on fit to the original dash for quick installation.
  • A-pillar pad friendly layout, usable raw or covered.
  • Clean custom look once upholstered or painted to match your interior.
  • Arizona made with consistent in-house quality control.

What’s included

  • Fiberglass dash overlay panel
  • Mounting hardware for bolt-on installation

Important: This panel is not sold upholstered. Final fit, finish, and any upholstery or paint work are the customer’s responsibility. Upholstered versions are planned for a future release. Professional installation is recommended.

Install overview

  1. Test fit the overlay on the factory dash and verify alignment.
  2. Mark any light trim areas if needed and attach using the supplied hardware.
  3. Finish the surface with upholstery or paint.

Typical bolt-on and test-fit time is about 30 minutes for an experienced installer.

FAQs

Does it come painted or upholstered?
No. It ships in a smooth, finish-ready surface. You can upholster or paint to match.

Do I need to modify my factory dash?
The overlay drops over the original dash and typically installs with minimal trimming.

Will it work with A-pillar pads?
Yes. The design accommodates A-pillar pads whether you run them raw or wrapped.

Questions about fitment or installation? Contact Fesler USA and our team will help you get it right.

Fesler Door Panel Designer

Visualize your custom door panels and interior before you order.

Fesler USA Interiors

Interior systems that feel engineered, not improvised.

Every Fesler kit starts as a CAD model and is built in fiberglass with a smooth gel-coat finish. Panels follow the body lines, gaps stay tight, and there is room for stitching, billet trim, audio, and screens without hacking the car apart.

If you are finishing a full build and want the cockpit to match the level of the paint, stance, and drivetrain, this is where you start.

Made in Arizona · Door panels, dash and console, headliners, trays and more
CAD modeled Fiberglass + gel-coat Factory mounting points Audio & stitching ready
Platforms
8+
Vehicle lines
C10, Camaro, Chevelle, Nova, trucks and more. Kits are shaped for specific bodies so you get OEM-style fit with a modern profile.
Model-specific tooling · No universal panels
Build Time
40–60
Hours saved
Builders report saving dozens of shop hours versus scratch-building panels and consoles from raw fiberglass or sheet metal.
Less fab time · More time on finish work
System Coverage
6–12
Pieces per car
Combine door panels, dash, console, headliner and rear trim into one design language so the interior reads as a single cockpit.
Full interior flow · Front to back continuity
MADE IN AMERICA

SHOP ALL INTERIOR

DASH

DOOR PANEL

CUSTOM SEATS

CONSOLE

STEERING WHEEL

Why Choose Fesler Interiors?

  • Handcrafted Excellence: Each interior product is custom-made with meticulous attention to detail.
  • Full Customization: Wrap your interior in the color combinations and materials of your choice.
  • American-Made Craftsmanship: Designed, manufactured, and supported entirely in the USA.
  • Seamless Integration: Perfectly designed to complement both classic and modern builds.
Custom upholstery & finishes

If you can dream it, you can build it around these parts.

Fesler fiberglass and steel pieces are the structure. Your choice of leather, vinyl, colors and stitching is what turns them into a one-off interior that matches the rest of the build.

Materials
What you wrap it in.
Premium leather Automotive vinyl Alcantara / suede Painted or textured
Panels are built with smooth faces and strong edges so your upholsterer can wrap in leather, vinyl, suede or even paint and texture without fighting thin lips or odd shapes.
Color & layout
How the interior reads at a glance.
Two-tone breaks OEM-style neutrals High-contrast accents Color-matched inserts
Clean lines and defined sections make it easy to run OEM-style neutrals, loud show-car combos or simple two-tone layouts that still look intentional.
Stitching
Patterns and thread choices.
Contrast stitching Diamond patterns Pleats & horizontals Logo embroidery zones
Stitching lanes and flat pads are built into the design, so diamonds, pleats and simple contrast lines stay even from side to side instead of wandering.
Details
The small stuff that makes it yours.
Billet trim & pulls Perforated inserts Embossed logos Audio & lighting zones
Each system leaves room for badges, perforated or embossed inserts, billet pieces, speakers and lighting so you can tie the interior back to the wheels, paint and engine bay.
Work with your upholsterer or builder to spec materials, colors and stitching around your Fesler interior kit.

Frequently Asked Questions

Answers to the top questions about Fesler Flush Mount and OEM Replacement Glass, including installation, performance, and what sets our glass apart.

WE SHIP ANYWHERE

If you are willing to pay for it, we are willing to ship it.

CUSTOMER SERVICE

You are not alone in your build!
Contact us- we are here to help.

QUALITY

You can always expect high quality, great fitting parts and components.