1970-81 2nd Gen Camaro Dash
1970–1981 Chevrolet Camaro Second Gen — Hand-Laid Fiberglass Dash Overlay — Drop-In Fit — Hand-Built in Phoenix, Arizona
Shipping & lead time
Fesler stocks most interior parts in Phoenix, Arizona. Standard orders ship within 1 to 3 business days. Customization options or backorders may extend the lead time. We will reach out if there is a delay on your order.
The Fesler USA 1970–1981 Camaro fiberglass dash overlay is a hand-laid, drop-in panel built for the second-gen Camaro's factory dash structure. Drops over the factory metal dash and bolts on in about 30 minutes. Designed to accept the Fesler billet AC vents, A-pillar pads, and your choice of gauge cluster. Raw gel-coat finish ships ready for your upholstery shop or paint booth. And if you're building a first-gen with a second-gen interior. Yes, it fits. We've sold several. Keep reading.
HAND-LAID IN PHOENIX. INSPECTED, FINISHED, PACKAGED, AND SHIPPED IN-HOUSE.
THIS IS NOT AN IMPORT PART.
Why builders choose the Fesler second-gen Camaro dash overlay
- Hand-laid fiberglass construction: Every panel is built, inspected, and finished in our Phoenix shop. Not injection-molded. Not sourced overseas.
- 30-minute bolt-on install: Drops directly over the factory 1970–1981 Camaro metal dash structure. No cutting into original metal on a stock second-gen application.
- Engineered for the Fesler ecosystem: Designed to accept Fesler billet AC vents and A-pillar pads raw or covered. Everything drawn together, everything lines up.
- Paint and upholstery ready: Smooth gel-coat finish gives your upholstery shop a clean, consistent surface. No guesswork on prep.
- First-gen Camaro compatible: This second-gen dash drops into a first-gen body with cutting and bracket work. We have customers running it in 1969 Camaros. It looks aggressive. A conversion kit is in development.
- Dakota Digital upgrade path: Select a Dakota Digital gauge cluster at a discounted bundle rate directly from the drop-down at checkout.
Add gauges and vents at checkout. Discounted bundle rate.
Select your Dakota Digital gauge cluster and Fesler billet AC vents from the drop-down above. The dash was designed around both. Bundle pricing is applied automatically.
What's included
- One (1) hand-laid fiberglass dash overlay, smooth gel-coat finish
- All hardware required for installation
Available via drop-down at checkout: Fesler billet AC vents (designed specifically for this dash) and Dakota Digital gauge clusters (discounted bundle rate).
Not included: Upholstery, paint finish, or A-pillar panels (sold separately).
Important: This panel is not sold upholstered.
It is the customer's responsibility to have this panel upholstered to match their interior. Upholstered panels are planned for a future offering. Professional installation is recommended.
Raw and unfinished. What to expect.
This dash ships raw in a smooth gel-coat finish, ready for your upholstery shop or paint booth. As with any hand-laid fiberglass part, plan on minor final fitment and finish prep to your specific car before upholstery or paint. Light gel-coat sanding, edge dressing, and test-fitting to your exact dash structure are normal steps for a flawless result.
Unless your part is pre-fit or wrapped by Fesler, that final fit and finish is handled on your end by you or your installer. Want us to pre-fit or upholster it? Contact us before ordering so we can quote it.
Fitment
- Primary application: 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977, 1978, 1979, 1980, and 1981 Chevrolet Camaro (second generation). Fits the factory metal dash structure for those model years.
- First-gen Camaro: This dash fits the 1967, 1968, and 1969 Camaro with modification. See the section below.
Gauge compatibility
Not all gauge clusters fit the same opening. Here is what works and what does not with this dash.
AC vents: This dash was designed to accept Fesler billet AC vents, available in the drop-down. Any standard vent will work with minor fitting. Your choice.
Running this dash in a first-gen Camaro
This second-gen dash looks aggressive in a 1969 Camaro. We have sold several. It works.
We posted a photo of it installed in a 69 below. The conversion is not plug-and-play, but builders are doing it and the result is a first-gen interior unlike anything on the road.
To run this dash in a 1967, 1968, or 1969 Camaro you will need to:
- Cut the top of the first-gen factory dash to clear the second-gen overlay profile
- Fabricate and install mounting brackets under the dash to bolt to the brake assembly
First-gen conversion kit is in devel
Shipping
- Typical ship window: 1 to 3 business days when the part is in stock.
- Backorders: Some parts are built to order and may take longer. We will reach out if there is a delay on your order.
- Custom options: Customization choices can add to the lead time while we prep, fit, and finish your part.
- Packaging: Every part is hand-packaged to withstand freight without damage.
- Hard deadline? Contact us before ordering so we can confirm timing.
Parts that fit the same build