E-Stopp Brake Cable Equalizer Bracket
E-Stopp Brake Cable Equalizer Bracket. The junction bracket that splits the single E-Stopp actuator cable into your two rear parking brake cables and balances the pull evenly side to side. Genuine E-Stopp hardware from an authorized dealer.
Genuine E-Stopp, authorized dealer
Fesler USA is an authorized E-Stopp dealer. This is the real E-Stopp equalizer bracket, also called the brake cable junction bracket, not a copy. Questions about your setup? We are here to help.
Splits one cable into two, evenly. The E-Stopp actuator pulls a single cable. This bracket ties that single pull into your two rear parking brake cables and balances the force across both sides.
The E-Stopp brake cable equalizer bracket is the simple piece that makes a clean dual-cable parking brake setup possible. Most rear axles run two parking brake cables, one to each wheel, but the E-Stopp actuator pulls a single cable. This bracket is the junction between them. It connects the single actuator cable to both rear cables and equalizes the pull so each side gets even holding force. If you are running E-Stopp on a typical two-cable rear setup, this is how you get balanced, reliable braking.
GENUINE E-STOPP EQUALIZER BRACKET.
EVEN, BALANCED PULL ACROSS BOTH REAR BRAKES.
What the equalizer bracket does
- Joins one cable to two: Connects the single E-Stopp actuator cable to your two rear parking brake cables.
- Balances the pull: Equalizes force side to side so both rear brakes hold evenly, about 300 pounds per caliper with the E-Stopp actuator.
- Clean, simple install: A compact bracket that keeps a dual-cable setup tidy and correct.
When you need one
Add an equalizer bracket any time your vehicle uses two rear parking brake cables, which is the most common setup on classic cars, trucks, and many custom builds. If your setup runs a single rear cable, you do not need one. Not sure which you have? Send us your setup and we will point you the right way.
Specifications
Need the brake itself? This is the equalizer bracket only. The complete electronic parking brake with the actuator, control module, and trigger is the E-Stopp universal electronic emergency brake kit.
Frequently asked questions
Does the E-Stopp kit include this bracket?
No. The equalizer bracket is sold separately. Add it if you are running two rear parking brake cables and want the pull balanced evenly across both sides.
Do I need an equalizer bracket?
If your vehicle uses two rear parking brake cables, yes. It splits the single E-Stopp cable to both and balances the force. Single-cable setups do not need one.
What exactly does it do?
It is the junction between the E-Stopp actuator's single cable and your two rear cables, equalizing the force so both rear brakes hold evenly.
Will it work with my E-Stopp?
Yes. It is designed for the E-Stopp electronic parking brake and the way its actuator pulls a single cable.
Building something custom?
Pair E-Stopp parts with Fesler flush-mount glass, hand-laid interior panels, billet hardware, and more. Browse the full Fesler lineup.
Not sure if your setup needs an equalizer bracket? Contact Fesler USA and we will help you get it right.
Keywords: E-Stopp equalizer bracket, E-Stopp brake cable junction bracket, parking brake cable equalizer, dual cable parking brake bracket, E-Stopp ESA1-BKT-CJ, electronic parking brake equalizer bracket, balance rear parking brake cables, E-Stopp accessory, Fesler USA E-Stopp.