Nova flush-mount glass replaces the factory windshield and rear window on a 1966-72 Nova, along with the bright reveal moldings and clips, with glass bonded directly into the body openings using automotive urethane. Fesler makes two kits: one for the 1966-67 Nova hardtop and one for the 1968-72 Nova, and they do not interchange. Both are DOT-certified laminated in front and tempered in the rear, made in North America with our partner Pilkington USA. This guide covers which kit fits your car, what comes in the box, and how to prep the body so the glass goes in once.
Shop by year: the 1966-67 Nova collection or the 1968-72 Nova collection. If you are not sure which body you have, read the next section first. It matters more on a Nova than on most cars.
Which Nova flush-mount glass kit fits my car?
The Nova changed a lot between 1967 and 1968, and the glass changed with it.
The Chevy II arrived for the 1962 model year, and Nova started out as the top trim level rather than the name of the car. The 1966 redesign gave it a bolder grille and a semi-fastback roofline. Two-door buyers had a choice between a post sedan and a hardtop that Chevy sold as the Sport Coupe. The hardtop was also the only body you could get as a Nova SS.
For 1968 the car was redesigned from the ground up. It got longer, it picked up a front subframe layout shared with the Camaro, and the lineup shrank to two bodies: a two-door coupe with a B-pillar and a four-door sedan. The hardtop and the wagon were gone. The next year Chevrolet dropped "Chevy II" from the name, and the car was simply the Nova.
So the first question is not just the year. On a 1966-67 car, it is whether the roof has a post.
| Your car | Which Fesler kit |
|---|---|
| 1966-67 Nova or Chevy II hardtop | 1966-67 Nova hardtop kit, front and rear |
| 1966-67 Nova post or sedan | Not a fit. The kit is hardtop only. |
| 1962-65 Chevy II or Nova | Windshield only. The 1966-67 windshield is listed to also fit 1962-1967 Nova. Call us to confirm your body. |
| 1968-72 Nova or Chevy II | 1968-72 Nova kit. The same glass fits every year from 1968 to 1972. |
The 1966-67 Nova hardtop kit: what fits and what is included
Here is what the live listing for the 1966-67 Nova hardtop flush-mount glass kit says, in one place.
| Full kit fits | 1966-1967 Chevrolet Nova hardtop, including the 1966-67 Chevy II hardtop |
|---|---|
| Windshield also fits | 1962-1967 Nova |
| Rear glass | 1966-67 hardtop only. Does not fit 1968-72. |
| Does not fit | Post or sedan Novas |
| Windshield | DOT-certified laminated glass, OE-style green hue, flush-mount profile |
| Rear glass | Tempered glass, OE-style green hue, flush-mount profile |
| Not included | Adhesives, primers, clips, trim (not required) and installation labor |
| Price at time of writing | $2,099 front and rear kit, $1,299 front only, $1,299 rear only |
The hardtop-only rule is not fine print. According to the listing, a post or sedan Nova has a roof approximately 2 inches taller than the hardtop. That changes the shape of the openings, so hardtop glass will not work on a post car. If you have a post car that someone has called a hardtop, or the other way around, look at the B-pillar before you order.
The windshield crossover is useful if you are building an earlier car. The listing says the windshield also fits 1962-1967 Nova, and it is sold on its own as a front-only option. The rear glass is a 1966-67 hardtop part. If your car is a 1962-65, call us with the body style before you order so we can confirm it.
The 1968-72 Nova kit: what fits and what is included
The 1968-72 Nova flush-mount glass kit is the simpler story, because the glass did not change during those five years.
| Kit fits | 1968-1972 Chevrolet Nova (X-body, third generation), including the 1968-72 Chevy II |
|---|---|
| Year coverage | Same glass for all 1968-1972 model years |
| Does not fit | 1966-67 Nova |
| Windshield | DOT-certified laminated glass, OE-style green hue, flush-mount profile |
| Rear glass | Tempered glass, OE-style green hue, flush-mount profile |
| Not included | Adhesives, primers, installation labor and tools |
| Price at time of writing | $2,099 front and rear kit, $1,299 front only, $1,299 rear only |
The listing covers the 1968-1972 Nova without splitting out the two-door and the four-door. If yours is a four-door sedan, call us before you order and we will tell you straight whether it works.
What both Nova kits have in common
The two kits fit different cars, but they share the same construction and the same rules.
- Glass type. A DOT-certified laminated windshield and a tempered rear glass. Both have an OE-style green hue and block 99.9% UVA, per the listings.
- No trim, no rubber. The glass is sized to bond within the original opening with a tight, even gap. It seals with a frit band, primer and automotive urethane. No exterior trim or rubber weatherstrip is required.
- No sanding to fit. Fesler prototypes, molds, test-fits, manufactures and test-fits again, so the glass fits as delivered on a correct body.
- Made with Pilkington USA. Fesler flush-mount glass is made in North America with our partner Pilkington USA.
- Professional install only. Use a certified auto glass technician, automotive urethane and the correct primers.
Why go flush on a Nova?
A stock Nova windshield and backlight are framed by bright reveal moldings that clip to the body. Reproduction molding and clip kits are still sold for both generations, which tells you how much hardware lives around those two openings.
Flush glass deletes all of it. The paint runs right up to the edge of the glass, and the body reads as one clean shape. On a 1966-67 hardtop, that semi-fastback roof is the best line on the car, and taking the bright trim off the backlight lets it carry the whole profile. On a 1968-72 coupe, the straighter, smoother body that arrived for 1968 gets cleaner too. Either way, you lose the channel under the trim where water and dirt sit against the steel.
It is the same bonding method modern cars use for their windshields. The difference on a Nova is that the opening was designed to be hidden under trim, so the prep has to be right.
How do you prep a Nova for flush-mount glass?
Most of the work on a good flush glass job happens before the glass shows up. Our guide on who installs flush-mount glass and what it costs goes deeper on finding the right installer. Here is the Nova version.
- Fix the metal first. Pull the old glass and look hard at the windshield and rear window pinch welds. Urethane will not bond permanently to rust, so repair it before anything else.
- Fill the clip holes before paint. With the reveal moldings gone, every clip hole and ripple near the opening shows right at the edge of the glass. Fill them and check the opening for flatness while the car is still in body work.
- Dry fit before paint. Set the glass in the opening during body work, confirm the gap, then paint, then bond it for real. Fesler's terms ask you to test fit within 60 days of receipt, so time the order to your body shop schedule.
- Tell us about your body. Reproduction bodies, such as Dynacorn, may need body work to accept the glass. If the roof, cowl or rear panel is new or heavily repaired, say so before you order.
- Use urethane, never butyl. Per our listings, butyl holds about 60 psi and urethane systems hold 600 psi or more. A bonded windshield is part of the body structure.
Worried about water? Read does flush-mount glass leak. The short answer is that a correctly prepped and bonded install seals the way a modern car does, and the failures trace back to rust or skipped steps.
Is Nova flush-mount glass street legal?
The windshield in both kits is DOT-certified laminated glass. Federal Motor Vehicle Safety Standard 205 requires glazing in motor vehicles to conform to ANSI/SAE Z26.1, and a certified manufacturer marks its glass with the "DOT" symbol and a code assigned by NHTSA. That mark in the corner of the glass is what an inspector or insurer looks for. Our DOT certified glass explainer breaks down every part of the marking.
Ordering, shipping and returns
Glass is heavy, fragile and built to order, so the terms are worth reading before you check out. From the live Nova listings:
- Estimated ship time is 10 to 15 business days from order date, in custom freight packaging.
- Glass ships LTL truck freight. A commercial address is recommended.
- Billing requires a signed Credit Card Authorization Form, and your card is not charged until the glass is ready to ship.
- Glass is non-returnable. Test fit within 60 days of receipt.
- If you have a hard deadline, contact us before ordering so we can confirm timing.
While you are planning, the Nova listings also point to the rest of our Nova interior system: door panels, kick panels, consoles and package trays for each generation. If the car is apart for glass, it is a good time to plan the interior too.
Frequently asked questions
Does the 1968-72 Nova glass kit fit a 1966 or 1967 Nova?
No. The 1968-72 kit does not fit the 1966-67 Nova. Fesler sells a separate kit for the 1966-67 Nova hardtop, and that rear glass does not fit a 1968-72 car either.
Will the 1966-67 Nova kit fit a post sedan?
No. The 1966-67 kit is hardtop only. Post and sedan Novas have a roof about 2 inches taller than the hardtop, so the glass geometry is different.
Will the windshield fit an earlier Chevy II?
The windshield from the 1966-67 kit is listed to also fit 1962-1967 Nova, and it is sold on its own as a front-only option. The rear glass is 1966-67 hardtop only. Call us to confirm your body style before ordering.
Is Nova flush-mount glass street legal?
The windshield is DOT-certified laminated glass and the rear is tempered glass. Federal standard FMVSS 205 requires automotive glazing to meet ANSI/SAE Z26.1 and carry the DOT symbol and an NHTSA-assigned manufacturer code.
What does Nova flush-mount glass cost?
Both Nova kits were listed at $2,099 for front and rear when this was written, with front-only and rear-only options at $1,299 each. Adhesives, primers and installation labor are not included.
Can I install Nova flush-mount glass myself?
We do not recommend it. Both Nova kits are listed as professional install only, using a certified auto glass technician, automotive urethane and the correct primers. Do not use butyl tape.
Ready to plan the glass for your Nova? Shop the 1966-67 Nova collection or the 1968-72 Nova collection, or call us at 480-748-2000 and tell us what body you have before you order.
Sources: Wikipedia, Chevrolet Chevy II / Nova (1962 debut, Nova trim origin, 1966 redesign and body styles, 1968 redesign and subframe, 1969 name change); Mac's Motor City Garage (1968 body styles, hardtop and wagon dropped, subframe shared with Camaro); Classic Industries reproduction molding and clip kit listings (factory reveal moldings and clips); eCFR, 49 CFR 571.205 (FMVSS 205 glazing and DOT marking requirements).












Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.