Build Tips

73-80 vs 81-87 Squarebody: what changed in 1981 and what interchanges

Early 1973-80 and late 1981-87 Chevy Squarebody pickups parked side by side outside a Phoenix shop

The 73-80 vs 81-87 Squarebody split comes down to one thing: in 1981 GM reshaped the truck from the windshield forward and left the cab alone. Late trucks got a new hood, fenders, grille, headlights, bumpers and exposed cowl-mounted wipers, plus a new dash and seats and a weight cut of up to 300 pounds. The cab and its glass openings carried straight through, which is why so many parts fit all fifteen years.

That split matters most when you are buying parts. Some things swap freely between early and late trucks. Some look like they should and do not. Below is what changed, how to tell the two apart in a parking lot, and which parts in our Squarebody collection fit which years.

What changed between the 73-80 and 81-87 Squarebody?

According to Hagerty's buyer's guide, the 1981 trucks got a new front fascia with a sleeker grille, new bumpers, a new tailgate, a more ergonomic dashboard and new seats. CJ Pony Parts adds that the hood became more sloped, the fenders and hood hinges were redesigned, the wipers moved from under the back edge of the hood to the top of the cowl, and the side marker lights turned horizontal. Under the truck, Hagerty lists a lighter semi-floating rear axle, lower-drag disc brakes and radial tires on 10 and 20 series trucks.

The goal was weight and air. GM cut up to 300 pounds depending on configuration, and the new nose was shaped to move through the wind better. What GM did not touch was the cab. The roof, the windshield opening and the back glass opening all stayed where the 1973 truck put them.

Hood 73-80: flatter hood that covers the wipers. 81-87: more sloped hood, wipers exposed on the cowl.
Front sheet metal 81-87 has redesigned fenders, hood, hood hinges, grille and front bumper.
Headlights 73-80: mostly round, with square lights on top-line Silverado trucks by 1980. 81-87: square headlights, with a four-light setup on upper trims.
Side markers 73-80: vertical. 81-87: horizontal.
Interior 1981 brought a new instrument panel, dash shape and seats. Door panels were also restyled in 1977.
Weight Up to 300 pounds lighter for 1981, depending on configuration.
Cab and glass openings Unchanged. Fesler's flush-mount windshield and rear glass are listed for 1973-1987 pickups.

How do you tell a 73-80 Squarebody from an 81-87?

Walk up to the front of the truck and look at the bottom of the windshield. If you can see the wiper arms sitting on the cowl, you are looking at a 1981 or later front end. On an early truck the hood's back edge hides them. That is the quickest tell, and it works from across a lot.

Next, look at the side marker lights on the front fenders. Vertical means early, horizontal means late. The hood profile is the third clue: the late hood slopes down toward the grille more than the early one.

Do not go by the headlights alone. Hagerty notes that the square-headlight front was offered on top-line Silverado trucks in 1980, so a square-eye truck is not automatically an 81. And keep in mind that a lot of these trucks have had front clips swapped over the years. The front end tells you what the nose is. The VIN and title tell you what the truck is.

What else changed year to year?

The 1981 facelift is the big line, but the Squarebody changed a little almost every year. A few of the changes builders run into most often, from Hagerty's guide:

  • 1977: new grille, and power windows, power locks, a rear defroster and intermittent wipers became available.
  • 1979: new grille shell that brought the headlights and turn signals into it, and a hood with a raised, plateau-shaped stamping.
  • 1980: square headlights on top-line Silverado trucks, and the full-time four-wheel-drive transfer case was dropped.
  • 1981: the facelift, plus a new NP208 transfer case on K10 and K20 trucks and automatic locking front hubs on K models. The 400 V8 was dropped.
  • 1982: the 6.2-liter diesel and the 700R4 overdrive automatic arrived.
  • 1985: the 4.3-liter V6 replaced the 250 six.
  • 1987: throttle body fuel injection on the 4.3, 5.0, 5.7 and 7.4 gas engines, and the C and K trucks were renamed R and V.

We tell the full story of the generation, including why it lasted so long, in our Squarebody history. The 1988-1991 trucks that kept the body after the new pickup launched get their own post: Chevy replaced the Squarebody in 1988, then kept building it.

Can you put an 81-87 front end on a 73-80 Squarebody?

Not as a straight bolt-on. The 1981 redesign changed the hood, the fenders and the hood hinges, and it moved the wipers out from under the hood to the top of the cowl. So a clip swap in either direction drags other parts along with it:

  • Hood hinges to match the hood you are running.
  • Wiper parts that match the front end, since early trucks tuck the wipers under the hood and late trucks put them on top of the cowl.

Treat it as a fabrication job, not a weekend bolt-on. Budget the time and do the mock-up before paint.

Does Squarebody glass interchange between early and late trucks?

Yes. This is where the unchanged cab pays off. Our Squarebody flush-mount glass kit is listed for every 1973-1987 Chevy and GMC C/K pickup, C10 through K30. One windshield and one rear glass cover both eras. The kit is made in North America with our partner Pilkington USA, with a DOT-certified laminated windshield and tempered rear glass. It is $1,899 for front and rear, $1,299 for the windshield only, or $899 for the rear only.

The windshield also fits the 1973-1989 Blazer, the 1973-1991 Jimmy, the 1973-1991 Suburban and 1973-1991 R/V pickups. The rear glass is specific to the pickup. If you are building a Blazer, our K5 Blazer glass guide covers Blazer fitment in detail.

A few rules from the product page apply to every truck. Glass is non-returnable, so test fit within 60 days of receipt. Install is professional only, with automotive urethane, never butyl. The glass is built to factory dimensions on factory sheet metal, and we do not recommend it for Premier Street Rod reproduction cabs.

Which Fesler interior parts fit 73-80 and 81-87 trucks?

Our Squarebody interior parts are hand-built in our Phoenix shop from hand-laid fiberglass, and they ship raw in gel coat for your trim shop. Here is the fitment each product page lists, so you can match your year before you order:

  • Dash overlay ($699): 1973-1986 C/K standard cab with the factory-style dash structure. Trucks with prior dash modifications may need minor trimming.
  • Door panels ($775, or $825 with grilles): 1973-1986 standard cab. Not designed for Suburban, Blazer or crew cab without modification.
  • Kick panels ($349, or $389 with grilles): 1973-1986 C/K trucks, including the Suburban.
  • A-pillars ($249) and rear side upper panels ($249): 1973-1987.
  • Headliner ($499): 1973-1987 trucks, with flush glass, stock glass or no glass.
  • Full interior kit ($2,538): 1973-1987 standard cab. Some 1988 R/V trucks with the same cab may fit, but verify your cab and dash first.

On paper, then, the 1981 dash and door panel changes do not split our parts into early and late versions: the listings cover both eras. The years that need a phone call are the edges: a 1987 for the parts listed through 1986, a 1988 R/V, or any truck with a dash that has already been cut.

Which gauges fit early and late Squarebody dashes?

We carry four Dakota Digital families for the Squarebody. The VHX-73C-PU ($945.25), HDX-73C-PU ($1,543.75) and GRFX-73C-PU ($1,947.50) are listed for 1973-1987 trucks. The RTX, which puts modern gauges in a factory-style layout, comes in two versions on our store: the RTX-73C-PU-X listed for 1973-1975 trucks and the RTX-79C-PU-X listed for 1979-1987 trucks, both $1,676.75. If your truck falls outside those RTX years, call us before you order and we will confirm the right part number. Our Dakota Digital guide explains how the four families differ.

Should you build an early or a late Squarebody?

That one is up to you, and it mostly comes down to the face you like. Early trucks have the hidden wipers and the round-eye grille that a lot of people picture when they hear the word Squarebody. Late trucks have the sharper nose, the lighter curb weight and, from 1982, the option of the 700R4 overdrive automatic.

For the glass and the cabin, it matters less than you would think. The same flush-mount windshield and rear glass fit both. Our interior parts are listed across the 1981 split. Plan the order you do the work in before you buy, and our Squarebody upgrade guide lays out that build sequence.

Frequently asked questions

What is the difference between a 73-80 and an 81-87 Squarebody?

The 1981 facelift reshaped everything ahead of the windshield: new hood, fenders, grille, headlights and bumpers, with the wipers moved out onto the cowl. GM also gave the trucks a new dashboard and seats and took out up to 300 pounds depending on configuration. The cab and the glass openings stayed the same.

How can I tell an early Squarebody from a late one?

Look at the base of the windshield. If the wiper arms sit in plain view on top of the cowl, it is a 1981 or later front end. Late trucks also have a more sloped hood and horizontal side marker lights. Square headlights alone do not prove it, because some 1980 Silverado trucks had them.

Will an 81-87 front clip bolt onto a 73-80 Squarebody?

Not as a straight bolt-on. The 1981 front end uses different hood hinges and moves the wipers up onto the cowl, so you need hinges and wiper parts that match the clip. Plan it as a fabrication job and mock it up before paint.

Is the windshield the same on 73-80 and 81-87 Squarebody trucks?

The opening is. Fesler's flush-mount Squarebody kit is listed for every 1973-1987 Chevy and GMC C/K pickup, front and rear, and the windshield alone also fits the 1973-1991 Suburban, the 1973-1991 Jimmy, the 1973-1989 Blazer and 1973-1991 R/V pickups.

Do Fesler Squarebody interior parts fit both early and late trucks?

Yes, within the years each product page lists. The dash overlay, door panels and kick panels are listed for 1973-1986, and the A-pillars, headliner and rear side upper panels for 1973-1987. The door panels and dash overlay are for the standard cab. If your truck is a 1987 or has a modified dash, call us before ordering.

Which Dakota Digital gauges fit a Squarebody?

The VHX-73C-PU, HDX-73C-PU and GRFX-73C-PU are listed for 1973-1987 trucks. The RTX comes in two versions on our store: RTX-73C-PU-X listed for 1973-1975 and RTX-79C-PU-X listed for 1979-1987. If your truck falls outside those years, call us before ordering.

Not sure which side of 1981 your truck falls on, or whether a part fits your exact year and cab? Browse the full Squarebody truck and Blazer collection or call us at 480-748-2000 and we will help you sort it out before you order.

Sources: Hagerty, 1973-87 Chevrolet/GMC truck buyer's guide (year-by-year changes, 1981 facelift and weight); CJ Pony Parts, Square body Chevy identification guide (hood, wiper, side marker and interior changes); Wikipedia, Chevrolet C/K third generation (secondary check on 1977 door panels and 1981 changes); Fesler USA product pages (fitment and prices).

Reading next

Custom Chevy trucks with flush mount glass parked outside State Farm Stadium in Glendale, Arizona, home of Dino's Git Down

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Parts for this buildFesler USA

1973-88 Chevy Squarebody Truck and Blazer Products

Shop all 48
1973–1987 Chevy/GMC Squarebody Flush-Mount Glass Kit — DOT, Trimless, American-Made (Front & Rear)
1973-91 C-10 Blazer DOT Flush Mount Rubber Less Glass Kit. Made in America.
1973–1986 Chevy/GMC Squarebody Windshield — OEM-Style, USA-Made (Not Flush Glass)
1973–1986 Chevy/GMC Squarebody Windshield — OEM-Style, USA-Made (Not Flush Glass) Contact Fesler for pricing
1973-86 CHEVY SQUAREBODY DASH OVERLAY

Planning a build?

Call or text 480-748-2000. Monday to Thursday, 8am to 5pm Arizona time.

Call the shop